Professional aircon cleaning in Perth typically takes 45 minutes to 1.5 hours for a single standard split system. A basic clean can be done in 30 to 45 minutes, a deep clean takes around 60 to 90 minutes, and bigger jobs like multiple units or ducted systems take two hours or more.
When you’re booking a clean, you want to know how much of your day it’s going to take. Perth’s dry, dusty summers and long runs of 38-degree days mean our aircons work hard, so a proper clean is worth doing right. This guide breaks down the time by system type, what makes a job quicker or longer, and when you can switch the aircon back on.
“A good clean isn’t about being quick. It’s about being thorough, then leaving the aircon properly dry.” — The Air Cool Care team
Aircon Cleaning Time by System Type
| Type of clean | Typical time |
| Single split system, basic clean | 30 to 45 minutes |
| Single split system, deep clean and sanitising | 60 to 90 minutes |
| Two to four split systems | 2 to 3 hours |
| Ducted system check and clean | 1.5 hours to several hours |
| Outdoor unit coil wash (add-on) | Extra 20 to 45 minutes |
| Drying time before restarting | 20 to 30 minutes, up to an hour |
Single Split System: Basic Clean (30 to 45 Minutes)
A basic clean takes about 30 to 45 minutes per unit.
This is the routine job. The technician removes and cleans the filters, wipes down the front panel and vents, and gives the unit a quick once-over. It suits an aircon that’s been looked after and just needs a tidy-up.
Technician tip: Basic cleans are quick because they stay on the surface. If the coil or blower wheel is grubby, a basic clean won’t reach it, and that’s when you need a deep clean.
Single Split System: Deep Clean and Sanitising (60 to 90 Minutes)
A deep clean takes about 60 to 90 minutes per unit.
This is where the technician gets into the parts you can’t see, flushing mould, bacteria and built-up grime out of the coils and the blower wheel. It takes longer because the unit has to be covered to protect your walls and floor, the parts need cleaning properly, and everything has to be rinsed, refitted and tested.
The blower wheel is the slowest part to get right. It sits behind the coil and collects grime in tight corners, so there’s no shortcut if you want it truly clean.
Cleaning Multiple Split Systems (2 to 3 Hours)
Cleaning two to four indoor units in a standard home usually takes two to three hours.
The time per unit stays similar, but a bigger job adds up. A second technician can bring the total down, with one working inside while the other handles the next room or the outdoor units.
Dirt levels matter too. A four-unit house where every unit is clogged will run longer than a house where the units have been looked after.
Technician tip: Book all your units in one visit. Setting up and packing up once is quicker than several separate call-outs.
Ducted Aircon Cleaning (1.5 Hours to Several Hours)
A ducted system check and clean takes anywhere from 1.5 hours to several hours.
There’s a lot more to a ducted system than a split. The technician deals with return-air filters, the number of zones, the vents and how easy it is to reach the indoor unit and ducts, often through a ceiling hatch or roof cavity.
A small single-zone system sits near the bottom of that range, while a large multi-zone home with tricky access takes longer.
Technician tip: Clear the area around your ceiling hatch and return-air grille before the visit. Having to move boxes in the roof space is one of the most common things that stretches a ducted job.
What Changes How Long Aircon Cleaning Takes
Two houses with the same aircon can have very different job times. Here’s what moves the needle:
- Condition of the unit. Heavy mould, pet hair or years of neglected dust will extend the job.
- How long since the last clean. The longer it’s been, the more grime has hardened onto the coil and fins.
- The outdoor unit. Adding an outdoor coil wash and pressure clean adds around 20 to 45 minutes.
- Number of units and team size. More units take longer, though two technicians can split the work.
- Access. Units mounted high, in tight spaces or needing a ladder take more time to set up safely.
In Perth, fine summer dust tends to settle into the coil, so units that haven’t been cleaned for a few seasons often sit towards the longer end of the range.
Drying Time: When Can You Use Your Aircon Again?
After a wet clean, wait about 20 to 30 minutes before switching the aircon back on, and up to an hour after a deeper wet or pressure clean. That gives the internal parts time to dry properly.
Technician tip: Don’t rush the restart. Switching on too early can leave moisture sitting in the unit, which is the last thing you want after a clean. We always let it dry first, then do a proper test run before we leave.
What a Deep Clean Visit Looks Like
Here’s an example of how a 75-minute deep clean of one split system might break down. Real jobs vary, but it shows where the time goes.
- Arrival, quick check and set-up: 5 to 10 minutes
- Protecting floors and walls, removing the panel and filters: about 10 minutes
- Cleaning the filters and front panel: about 10 minutes
- Cleaning the coil and blower wheel: about 30 minutes
- Refitting, drying and test run: 15 to 20 minutes
How to Get the Job Done Faster
A bit of prep helps the technician get in and out without wasted time:
- Clear the area under and around the indoor unit
- Make sure there’s easy access to the outdoor unit
- Have all units ready for the same visit
- Keep pets in another room
- Move furniture, boxes and clutter away from ceiling hatches and return-air grilles
Booking an Aircon Clean in Perth With Air Cool Care
At Air Cool Care, we clean split systems and ducted aircons across Perth, from Joondalup and Wanneroo down to Fremantle, Rockingham, Mandurah and Armadale. Tell us how many units you have and when they were last cleaned, and we’ll give you a clear idea of how long to set aside.
When the first heatwave hits, diaries fill up fast, so it pays to book before summer gets going.
Frequently Asked Questions
1. Do I need to be home while my aircon is being cleaned?
Usually someone should be there to let the technician in and show them the units. You don’t need to stand over the job, but it’s handy to have someone around to answer questions and sign off when it’s done.
2. How often should I get my aircon cleaned in Perth?
Once a year is a good rule, ideally before summer. If you run the aircon daily, have pets or live near dusty roads or building sites, a clean more often can help keep it running well.
3. How much does aircon cleaning cost in Perth?
It depends on the type of system, how many units you have and whether you want a basic or deep clean. Ask for a quote that spells out what’s included, so you can compare jobs fairly.
4. How long does it take to clean an aircon myself?
Washing the filters at home takes around 10 minutes. A full DIY wipe-down can take under an hour, but it won’t reach the coil or blower wheel the way a professional clean does.
5. How do I know my aircon needs a clean?
Typical signs are a musty smell, weaker airflow, less cooling than before and dust blowing from the vents. If you notice any of these, a clean is a good idea.
Conclusion
A professional aircon clean in Perth usually takes 45 minutes to 1.5 hours for a standard split system, with a basic clean at the quicker end and a deep clean at the longer end. Multiple units and ducted systems take two hours or more, and the condition of the unit, how long since the last clean, outdoor coil washing and access can all change the time.
Leave the aircon to dry before you switch it back on. If you’d like a clearer idea for your own place, Air Cool Care is always happy to help.